|
 From Deb (USA)
Materials:
- Piece of plastic canvas 34 holes by 5 holes
-
3 lengths of vinyl lacing 12 inches long, this will be color A
-
2 lengths of vinyl
lacing 12 inches long, this will be color B
-
Scissors
Directions:
Holding plastic canvas so 34 holes are vertical. Take one of the 3 lengths, color A, of lacing and slip through first hole starting at the
bottom right hand corner, leaving about an inch loose. Weave lacing in and out of holes until you reach the top. Do not trim end.
Using color B, start at the bottom of next row, slip lacing through first hole as done before. Skip next hole and pull lacing through
following hole. Weave lacing in and out every other hole until you reach the top pull lacing through last hole. Repeat a row with color A,
then color B, and color A again. When done trim loose ends, either on an angle or straight across. Leave at least a half-inch on each
end, so weaving doesn't come undone.
|
